prefect
Home Engineering Audio Biking Publications Photo Gallery Personal Info
DACS: Universal User Interface and Cue Stack Submodules
 
  next up previous contents
Next: Microcontroller Module (Pbus and Up: Control Board Previous: Transport Control Module   Contents

Universal User Interface and Cue Stack Submodules

As previously mentioned, the rotary encoder present in the universal user interface section connects to the transport control section. Figure 54 shows this connection and the associated circuit.

Figure 54: Universal user interface submodule, rotary encoder schematic. This circuit connects to the transport control encoder interface.
\begin{figure}
\psfig{file=schem/univ-enc.eps,width=6in,height=7in}
\end{figure}

The universal user interface module also contains a pair of pushbutton switches. These switches interface to the output assign board, as shown in figure 55.

Figure 55: Universal user interface submodule, momentary pushbutton interface schematic. This circuit connects to the output assign button interface.
\begin{figure}
\psfig{file=schem/univ-btn.eps,width=6in,height=7in}
\end{figure}

The cue stack control section contains three pushbutton switches that interface to the output assign module. Figure 56 shows this connection.

Figure 56: Cue stack submodule, momentary pushbutton interface schematic. This circuit connects to the output assign button interface.
\begin{figure}
\psfig{file=schem/cue-btn.eps,width=6in,height=7in}
\end{figure}


next up previous contents
Next: Microcontroller Module (Pbus and Up: Control Board Previous: Transport Control Module   Contents
Steve Richardson 2000-07-06
Table of Contents

[PDF] [Whole document in PDF 1.9MB]

[more photos and information]

 
Page last modified:
Copyright © 1993-2000 prefect - All Rights Reserved.