Home

Engineering

Publications

	WPI Technical Theatre Handbook: Flying Set Pieces
	Flying Set Pieces Safe flying of set pieces requires careful application of both set design and rigging techniques. Appropriate hardware needs to be applied at structurally sound points on the scenery and attached to battens in the proper fashion. Special attention needs to be paid to adjacent line sets so that flown scenery will not interfere with lighting or audio equipment that may be occupying nearby fly space. Rigging hard scenery is reasonably straightforward. Often, threaded eye bolts are used to provide a means of connecting wire rope to the set piece. These eye bolts are mounted in pre-drilled holes using washers. In many cases, this point is reinforced using additional wood to make it more structurally sound. When rigging walls, it is vastly preferable to tie in to the bottom of the wall rather than the top. In practice this may be impossible, as the set piece may contain many door and window cutouts. Good judgement must be exercised on the parts of both the set construction crew and the rigging crew in order to safely rig and fly set pieces. Use of information in this document implies understanding and agreement with the copyright and terms of use. Specifically, no warranty is expressed or implied regarding the accuracy of the information contained within. YOU USE THIS INFORMATION AT YOUR OWN RISK. All trademarks are property of their respective owners. You must obtain permission from the author before using the contents of The Handbook for anything other than private use.	Table of Contents [Whole book in PDF 5.3MB] Contents Introduction Goals Sources Methods Conclusions Costumes Introduction Procurement Fabrics Color Patterns Fitting Rehearsal Clothing Design How to Begin Color Practicality Documents The Set Introduction Set Pieces Platforms Flats Stairs Rakes Other Structures Floor Coverings Construction Materials Tools Finishing Painting Types of Paint Mixing Paints Applying Paint Draperies Design How to Begin Documents Computer-Aided Design A Typical Set Construction at WPI Rigging Introduction Common Rigging Hardware Rope Wire Rope Thimbles, Wire Rope Clips, and Swages Shackles, Turnbuckles and Hooks Chain & Rapid Links Slings Fly Methods Non-Counterweighted Pulley Systems Counterweighted Fly Systems Lifts Chain Motors Flying Set Pieces Lighting Introduction Lighting Instruments Scoops Cyclorama Lights Parabolic Reflector Cans Fresnel Spotlights Ellipsoidal Reflector Spotlights Automated Instruments Color Color Theory Primary, Secondary and Complementary Colors of Light Light Mixing Practical Use of Color Glass, Gelatine and Plastics Dichroic Color Filters Patterns Dimmers Dimmer History Cables and Connectors Lighting Boards Control Design Washes Specials Cyclorama Lighting Color Lighting Angle Simulating Exteriors Lighting Design Paperwork Shop Order Instrument Plots Focus Sheets Computer-Aided Lighting Design A Typical Lighting Hang at WPI Audio Introduction Input Microphones Converting Sound to Electricity Directionality Analog Tape Digital Audio Tape (DAT) Compact Disc (CD) Mini-Disc (MD) Digital Samplers Computer Sound Cards Mixing Boards Signal Processing Equipment Equalizers Compressors and Limiters Noise Gates Effects Processors Output Power Amplifiers Speakers Crossovers Cabling and Connectors Line-Level Speaker-Level Automation Design Creating and Obtaining Effects Editing and Processing Effects Designing the Sound System The Input Section Signal Processing The Output Section A Typical Audio Setup at WPI Power Introduction Basic Theory Power Feeds Power Distribution Boxes Power Protection Important Considerations Special Effects Introduction Animated Costuming Smoke and Fog Pyrotechnics Acknowledgements References List of Figures Index About this document ...

Page last modified:

Copyright © 1993-2000 prefect - All Rights Reserved.